Brick Paver Installation & Edging



Staging of material

Many paver tasks will vary depending on gain access to, website conditions, job size and of course, the weather condition. Careful factor to consider should be taken to identify the time to begin the paver installation.

The foreman or task manager must constantly have the materials (sand/ pavers) dispersed around the task site for effective and easy setups. Paver pallets/bundles ought to be put in a way not to disrupt the paver installation. The appropriate pallet/bundle placement can make the real job installation much easier and quicker by lowering the total labor of handling the product.

Brick paver patterns

Pavers can be put in various patterns depending on their shape. Each paver shape will generally have numerous different hatch patterns that are supplied by the manufacturer.

The laying pattern and shape of the paver is really critical to the performance of the application. Professionals have to take into account the traffic weight loads on their paver tasks. 90 or 45 degree herringbone patterns are recommended in all street and driveway applications, as these patterns will offer the optimum load assistance needed and will withstand sneaking from the turning of tires and starting or braking of automobile traffic. In many applications around the world, it has actually been shown that pavers laid in a herringbone pattern have carried out adequately.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be used in commercial or commercial applications ought to be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a variety of conditions that determine the starting point of a paver job.

When beginning to set up pavers it is best to snap a real straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface of the bed linen sand at the ended up elevation of the pavers This will assist as a guide for maintaining straight joint lines and will also enable the installer to make adjustments in the alignment of the pavers.

Buildings and concrete suppressing are generally not straight and should not be used for establishing straight joint lines. The use of string lines is vital to identify the real straightness of the edge. As the paver installation advances, the string lines will assist minimize the need for small trim pieces.

These will preserve a minimum joint width and allow the bedding and jointing sand to go into in between each paver. Pavers with spacer bars are generally not laid in snug against each other because a string line will provide consistent joint spacing.

Installation of brick pavers.

One of the most commonly utilized techniques for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along among the true straight lines that you have actually pulled or above the bed linen sand. This will offer you a straight and real line off which to work. As soon as this row is developed, you can continue to work external into the field with the remainder of the pavers. Always make sure to periodically check your joint lines to make sure they are straight and true. If not, adjustments to the pavers can be made as you continue installing. Pavers should be installed hand tight. The very best method is to place a paver against another one and let it move down into the bed linen sand. Do not kick or tap the pavers into place as this can throw your lines out of true straightness.

When installing pavers on a high grade, they must be installed at the base of the grade going uphill. This will prevent the pavers from creeping as they are being laid.

The best method for setting up pavers on large tasks is to install them mechanically. There are a couple products a contractor should think about before installing pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in particular patterns.

2.) The professional must make certain that the producer can production and bundling pavers in the desired pattern on the pallets for simple mechanical installation.

Poor color blending might result in a patchy looking installation. Most producers are consistent with color mixing on each bundle of pavers, however it is the contractor's duty to ensure appropriate mixing in the field.

Cutting treatments for brick pavers.

Contractors generally have 2 methods of cutting pavers. When cutting pavers damp, it will help lessen dust and will prolong the diamond blades life. The operator of the brick saw should constantly cut the pavers away from the surface area of the paver field when cutting wet, due to the fact that the pavers will produce a slurry that will stain the paver surface area.

The brick saw operator needs to constantly wear the proper security that is required for running a saw, such Patio Pavers West Palm Beach as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a major function in the total success of an interlocking pavement installation Edging restraints eliminate lateral movement of the pavers and hold the pavers tightly together. Particularly at the external border of the paver application, without an edging restraint, your task is guaranteed to fail in time.

There are several various edging restraints from which specialists can choose. Typically produced edge restraints are the most typically utilized by specialists. Made edging restraints can vary from, plastic edging, steel and aluminum, lumbers or precast concrete and stone. An edging type that is used primarily in industrial and industrial applications is poured-in-place concrete curbs. This edging restraint is usually set up by other specialists.

Edging installation.

This could result in the migration of the bed linen sand and eventual lateral motion of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile fabric is advised. When a gap in between the pavers and the edging surpasses 3/8" (10mm), then the area must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire location that is to be compacted need to be swept clean of any foreign things and debris that can trigger scratching or scuffing on the surface of the pavers.

It is important to have a compactor that can put in between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is important that the very first compaction takes place prior to any jointing sand has been applied to the pavers. If jointing sand is applied to the pavers prior to compaction takes place, this can trigger a bridging problem and will not enable the joints to be completely filled with jointing sand. This can also avoid the pavers from being properly set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of two passes in various directions throughout the pavers. This will permit the pavers to be correctly embeded in the bedding sand and will require the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very crucial to the last efficiency of the pavers. Failure to do proper compaction can result in contortions and pavement failure in time.


Paver pallets/bundles must be placed in a manner not to interfere with the paver installation. One of the most commonly utilized methods for the installation of pavers is hand installation of each paver. The operator of the brick saw must always cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will produce a slurry that will stain the paver surface area. Edging restraints eliminate lateral motion of the pavers and hold the pavers securely together. When a gap in between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *